This is a large deep slash silicone prosthetic using acetone based cap plastic.
This slash is good for both beginners and advanced MUA'S looking to either practice the craft of sfx or apply on a film set, brilliant to have in your kit as a backup for any unexpected changes to script.
Wound can be applied anywhere on the body and if you want a fantasy based look I can custom the colour choice to fit your brief.
Slash #6 Prosthetic
Step 1:
Ensure the skin is clean and prepped before application, using products such as IPA for cleaning and Derma Shield for prep. Make sure the skin is dry before applying glue.
Step 2:
Depending on your adhesive of choice, apply a thin layer of adhesive to both the skin and the back of the prosthetic, unless you are using a silicone adhesive such as Sil-Key where you can just apply to the skin, and let them both go dry/clear/tacky.
Step 3:
When you are happy with the position, gently apply the piece to the desired position, focusing on the middle section and working outwards, and smoothing it down to the edges. It can help to do this with a sponge or soft brush to get the cap plastic nice and smooth on the skin without any wrinkling.
Step 4:
Using a brush or cotton bud dipped in acetone, gently soak around the edge of the flashing (silicone border around the prosthetic). Gently blend the edge of the thin plastic and dissolve the edge against the skin and make it disappear!
Step 5:
If you are struggling to hide an edge, we advise adding a stippled layer of prosaide around the edge and let it dry. You can then dust this with some powder to seal it before painting.
Step 6:
Once the edges are dissolved and blended onto the skin, add another layer of loose powder to get rid of any tacky adhesive. Now you are ready to paint your prosthetic! You can use alcohol activated paints, water based paints, grease/oil based paints or even regular make up. Once you have finished painting you use a setting spray to seal the application.
To remove the prosthetic, I would recommend using a product like 'Bond-off' which is gentle on the skin, using either a brush or a cotton bud, gently work in circular motions around one of the edges until the edge begins to lift. Once the edge of the cap plastic has started to lift you can gently lift and get the brush/cotton bud underneath the prosthetic, continuing with circular motions until the piece has come clean off. Once prosthetic has been removed go over the area with a cotton pad and your remover to get any remaining adhesive off the skin